A diving regulator is a pressure regulator used in scuba or surface supplied diving equipment that reduces pressurized breathing gas to ambient pressure and delivers it to the diver. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a cylinder worn by the diver (as in a scuba tank) or via a hose from a compressor or a bank of cylinders on the surface (Snubling). This set-up includes a “first stage” and “second stage”.
As a nearly universal standard practice in modern recreational diving, the typical single-hose regulator has a spare demand valve fitted for emergency use by the diver’s buddy, typically referred to as the octopus (secondary regulator) because of the extra hose, or secondary demand valve.
Scuba Gauges, are also known as Submersible Pressure Gauges (SPGs) or a Console, contain a pressure gauge, depth gauge and sometimes a dive computer.
Kirk Scuba Gear carries many different SPG’s (gauges) from an assortment of manufacturers.
-
This bag can fit in the front pouch of the the Roller Backpack, along the base of the Maverick Roller Bag and the Roller Duffel Bag, or along the side of the Cohort Duffel and the Standard Duffel.
-
NO Longer AVAILABLE::DISCONTINUED This is the ABSILUBE™ Pure Silicone Grease for Scuba Divers.
-
ON BACKORDER This is the Deep 6 Divesoft Freedom Nitrox Analyzer for Scuba Divers. FREE Shipping in the USA DOES NOT apply to this product
-
This item is DISCONTINUED
This is the SCUBA to Medical O2 - Adaptor & Flow Restrictor for Scuba Divers -
Do you find it difficult to Connect/Disconnect your BCD Low Pressure Inflator Hose? Not to worry anymore with XS Scuba's Easy QD Gripper.
-
If you don't have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
-
This 1" Tank Band is perfect for 40 and 80 cu/ft tanks.
-
Whether missing a LP Port Plug for your regulator or if you just could use one in your save-a-dive kit?
-
Always have your octo close at hand with this great little keeper.
-
A great way to keep your gear secure on your next dive.
-
This is required if you attach a hose with a transmitter. It will stop leaks.
-
A secure way to keep your octo within sight and within quick reach
-
A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed.
-
This is a great accessory to have to protect your expensive regulator mouthpiece.
-
The Atomic hose protector will help keep your regulator set up in its best condition possible. These protectors can be added to your hoses on either side or commonly on the side attaching to your 1st stage
-
Standard octo holder. Precision fitting make this the most popular and original octo holder and mouthpiece protector made. Insert mouthpiece one side at a time to lock in for a tight seal. Patent #D321-247
-
This are the DRIS Dive Gear Color Purge Covers for Illusion Regulators for Scuba Divers.
-
This is the XS Scuba Highland Garvin Hook for Jonline for Scuba Divers.
-
This is the Razor Sidemount About Break Away Connector for Scuba Divers
-
This is the Highland 4.5” SS Shackle for Scuba Divers
-
Save money with this high pressure replacement spool instead of a new gauge. Afford to dive!
-
This product extends air hose life, use to identify each hose. There are many colors to choose from and they fit most scuba diving air hoses. Provides color enhancement and protects hoses from abrasion
-
Ultra comfortable for long dives.
-
This is the ABSI-LUBE™ Pure Silicone Spray with Conditioners for Scuba Divers.
-
Always keep your Regulator or Octo close at hand with this great clip from Innovative Scuba Concepts.
-
This is the Dive Rite LP to Inflator Adaptor
-
The Wrist Pouch is designed to fit comfortably around your gauge, up to 1.5 inches wide (4.25cm).
-
This is the Apeks Anti-Bacterial Mouthpiece for Scuba Divers.
-
This is the XS Scuba Basic BC/Regulator Hanger Sturdy Construction for Scuba Divers.
-
An essential spare item, don't let a bad mouthpiece be the cause of a leaking regulator, a great item to always have on hand..
-
Make sure your reg or octo is always easily accessible
-
This is the DRIS Dive Gear Illusion First Stage Service Kit for Illusion Regulator Package.
-
Secure attachment of a clip without causing potential damage to the hose. For use with all low pressure scuba hoses with an approximate 0.5 inch diameter.
-
This is the ScubaMax Ultimate Octo Holder for Scuba Divers
-
This is the EZ QD Adapter
-
This awesome 700 psi Rescue Tape should be a must have for any household Keep it with your dive gear, in the car, on the boat and at home
-
Are you seeking the ability to connect and disconnect high pressure components from your regulator set up? Have a high end dive computer that you don't want to leave dangling? Well, look no further!
-
This Max Flex Braided Regulator Hose is the perfect addition to your reg, get the most out of your gear and opt for the longest lasting, quality made gear from Aeris
-
Don't be left out on your next dive, this is a great kit from Trident!!!
-
Super Force models are necessary for the retractor to overcome the stiffness of the high-pressure hose. This large locking version allows you to tether your console at your hip, stomach or chest area. Keeps you streamlined and your console is always right where you need it.
-
The "Octo-Z hose to Generic Inflator Hose Adaptor" allows a standard power inflator to be used with an Octo-Z hose.
-
This is the Edge Regulator Color Kit for Women Divers.
-
Convert any standard regulator hose to a "ScubaPro Style" QD hose.
-
This is the XS Scuba Seaquest QD Hose Adapter for Scuba Divers.
-
This is the XS Scuba Oceanic Style QD Hose Adapter for Scuba Divers.
-
This is the 6" Stainless Steel Braided High Pressure Hose for Scuba Divers.
-
XS Scuba Spanner Wrench Round Surface fits most manufacturer's first stages.
-
Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses.
-
High strength stretch (to 36”) coils provide connected security to dive accessories. Each of the different ends make attachment easy. Quick release feature allows you to safely lock the item in close or release for ease of use. Ideal for cameras, lights and instruments.
-
This is the Highland 5.0” Snap Shackle for Scuba Divers
-
Enjoy your Dive or Snorkel experience to its fullest with the SeaCURE mouthpiece
-
Currently OUT OF STOCK This is the Zeagle Octo-Z hose fitting, install into any 3/8" regulator hose for dive regulators.
-
Streamline your dive profile with these great new Magna Clips from Trident!
-
Anyone who has had to discharge old, leftover breathing mix knows what a problem it is to keep the hiss of the released air to a reasonable level even during relatively slow discharge.
-
This is the Scuba Max Converter for DIN regulator to Yoke...why pay more?
-
This is XS Scuba LP Angle Adapters for Scuba Divers
-
Want maximum protection for your regulator set up, maybe with long hose, dive computer, and other instruments? Don't skimp on protection.
-
This is the Trident All in one Multi Tool.
-
Your safety depends on a well kept regulator setup, protect your safety and your investment with this padded regulator bag from Aquacraft.
-
This is the XS Scuba Highland HP Inline Adapter for scuba divers.
-
An innovative way to keep your gear streamlined and you gauges close by.
-
This is the Hollis H/P High Pressure Hose for Pressure Gauges - Available in 6", 9", 24", 28"
-
This is the Aqua Lung Explorer Collection II: Diving Regulator Case Bag For Scuba Divers
-
FREE Shipping in the USA Utilizing the same locking mechanism as the Talon knives, the Edge Knife is a smaller version with shorter 3" blade. This knife can be easily installed on a Sherwood or Genesis BCD, but also comes with a unique hose mount attachment that allows you to install the knife on your High Pressure Hose. Made of 304 Stainless Steel, you are sure to have this knife serve you well for years to come. The Edge is a great small compact knife.
-
This is the Stainless Steel Star Tool::XS Scuba
-
This is the XS Scuba Voyager 5 Scuba Diving Regulator Bag for Scuba Divers
-
This is the XS Scuba Highland Inline Shut Off for 1st and 2nd Stage for Scuba Divers.
-
This is the Trident 7ft Scuba Diving Regulator LP Hose with 3/8 Male Connector
-
This is the Zeagle Tank Fill Adaptor 330-FA10-AA Connection for Standard Scuba Valve Filling Whip.
-
This is the XS Scuba Leeward 6 Regulator Bag for Scuba Divers
-
This is the XS Scuba SuperTilt Compass Module ONLY for Scuba Divers.
-
FREE Shipping in the USA Oceanic's deluxe regulator bag is a fully padded safe place for the gear you depend on in deep dark places.
-
This is the XS Scuba Standard Wrist/Hose Mount Compass Complete for Scuba Divers.
-
Install hose protectors with ease with this installation tool from Innovative Scuba Concepts.
-
This is the XS Scuba Highland Deluxe Inline Shut Off for Second Stage
-
This is the Deep 6 Oxygen sensor Divesoft R22S.:::::Currently Out of Stock FREE Shipping in the USA DOES NOT apply to this product
-
Protecting your computer or instrument console is of high priority. XS Scuba's Quick Disconnect (QD) Adapter Bayonet Mount allows you with a simple push and turn by hand to detach your dive instruments from the high-pressure hose.
-
This is the 360 degree Swivel for Any Standard Scuba Regulator 2nd Stage or Octo.
-
Prevent unnecessary inconveniences on your dive trip with this handy o-ring kit
-
This re-enforced coil shock line is great for securing your valuable gear while diving, spearfishing etc.
-
Upon request from divers that prefer a stiffer and a more robust HP hose than the Miflex Xtreme-hi range, but with more flexibility than the traditional rubber hoses, Miflex have developed a new high performance HP hose.
-
This is the Zeagle Compact Pony SPG Pressure Gauge for Scuba Diving Bottle Spare Cylinder.
-
FREE SHIPPING IN THE USA This is a Multi-Function Regulator/Computer Carry-On Bag. The Molokini features a Roomy Main Compartment Fully Capable of Accommodating a Regulator Set-Up, has a 16" (40.6 cm) Screen Laptop Sleeve, and a Neoprene Dive Computer/Console Holder, as well as other Accessory Pockets.
-
This ChristoLube "super lubricant" has been adopted industry wide for virtually all regulator maintenance.
-
This is the XS Scuba Miflex DS "Dual Swivel" Regulator Hoses::Scuba Divers
-
FREE Shipping in the USA This Genesis Wrist Compass is a great compass that makes navigation quick and easy.
-
This Genesis Hose Mount Compass is a great compass that makes navigation quick and easy.
-
Free Shipping in the USA
-
This Tilos dual regulator adapter is the DIN version that connects the left and right modular valves together to build a manifold.
-
FREE Shipping in the USA This is the XS Scuba Wrist Mounted Depth Gauge for Scuba Divers
-
FREE shipping in the USA Tilos Dual Regulator Adapter YOKE
-
This Genesis Retractable Compass is a GREAT compass that makes navigation quick and easy.
-
This is the Trident Tank to Tire Inflator Yoke First Stage with Hose and Tire Connection
-
SPECIAL Price! ScubaMax min 3 gauge dive console::::why pay more? ScubaMax is known for its quality dive gear, reasonably priced::made in Italy.
-
Free Shipping in the USA This is the Trident 25 ft 3/8" Scuba Diving Regulator Hose - Available in Black OR Yellow
-
FREE Shipping in the USA Universal Comfort Swivel Hose (fits Most Second Stages With Standard 9/16-18 Hose Connection) 32"
-
SPECIAL Price! Full size two gauge dive console from ScubaMax::::reasonable price/quality scuba gear. Why pay more?
-
This is the ScubaMax two-gauge mini console. This product is produced in Italy.
-
This is a full-size three gauge console that is equipped with air-filled heavy-duty steel case depth and pressure gauges.
-
This is the 65 pc Professional Diver's Tool Kit Set w/ Case, Pliers, Screwdrivers, etc.
-
FREE Shipping in the USA::Black ONLY in Stock This is the Trident 50 ft 3/8" Scuba Diving Regulator Hose
-
FREE Shipping in the USA This is the PALM-CO Carbon Monoxide Analyzer for Scuba Divers
-
FREE Shipping in the USA Make sure your next dive is a safe one with this great pony bottle from H2Odyssey.
-
Built from precision, originality and performance, ScubaMax equipment works to combine durability and affordability. Our products embody the contemporary design and the professional composition needed to help divers perform better, feel better and explore better. It is not only about the style and comfort, it is the experience. Our one simple goal is helping you achieve the best underwater exhibition we can provide.
-
FREE Shipping in the USA This is the Aqua Lung The Elemental Package for Beginner Scuba Divers.