/, Drysuits / Accessories, Scuba Accessories, Technical Diving/Dive Rite Weight Harness – No Pockets for Scuba Divers

Dive Rite Weight Harness – No Pockets for Scuba Divers

$89.00

FREE Shipping in the USA

Fully adjustable to fit any size diver. Designed to be worn beneath any BCD. Made in the U.S.A.

Description

Dive Rite Weight Harness – No Pockets for Scuba Divers

FREE Shipping in the USA

SPECS:::

Our customizable weight harness is for divers who want the flexibilty to wear weight independent of the BCD. Designed to be used with any weight pocket in the Dive Rite line, the Weight Harness holds up to 40 lbs of weight in multiple drop pockets (NOTE: Pockets not included). Premium marine-grade stainless steel hardware is custom made to make sizing easy, plus keeps the straps in place when removing the harness as compared to over-the-shoulder straps that simply slide onto the waist strap. This unique design holds the Weight Harness in place when donning and doffing, plus prevents weight from shifting during the dive.

The Dive Rite Weight Harness is easily readjusted for exposure protection, taking the diver from heavy thermal undergarments with a drysuit to a 3mm wetsuit, if desired. Weight can be placed in a variety of locations to achieve optimal trim, plus those diving in cold water with thick thermal protection can spread heavy weight between the Weight Harness and the BCD.

Fully adjustable to fit any size diver. Designed to be worn beneath any BCD. Made in the U.S.A.

Specs:

  • Custom, marine-grade stainless steel hardware
  • Two-inch nylon webbing has 2,800 lbs tensile strength
  • Made in the U.S.A.

Add On Options:

Weight Pocket Sytem QB- 16lb

Tech Specs:

  • Holds up to 8 lbs (3.6 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
  • 1680 denier ballistic nylon fabric is tear and abrasion resistant.
  • Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
  • Acetyl quick buckle is used to easily secure the pocket in the holster.
  • Nickel plated brass grommets resist rust and corrosion.
  • 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm)
  • 12 oz (340.2 g)
  • Made in the U.S.A.

Weight Pocket System QB – 32lb

Tech Specs:

  • Holds up to 16 lbs (7.25 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
  • 1680 denier ballistic nylon fabric is tear and abrasion resistant.
  • Two-inch (50 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
  • Acetyl quick buckle is used to easily open and close the pocket.
  • Nickel plated brass grommets resist rust and corrosion.
  • 8.5-in high x 6-in wide x 1.5-in deep (21.6 cm x 15.3 cm x 3.8 cm)
  • 1.13 lb (0.51kg)

Warranty

Additional information

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “Dive Rite Weight Harness – No Pockets for Scuba Divers”

Your email address will not be published. Required fields are marked *

You may also like…