Sea & Sea YS-01 Compact DS-TTL Manual Strobe with Target Light

Description

Sea & Sea YS-01 Compact DS-TTL Manual Strobe with Target Light

FREE Shipping in the USA

SPECS::

• Guide Number (ISO 100/m) (land): 20
• Beam Angle: 100°x 100° (with diffuser 110°x110°)
• Batteries: 4xAA A: 6V Ni-MH: 4.8V
• Number of Flashes: A: 230 Ni-MH: 330
• Recycle time (full): A: 2.5 sec. Ni-MH: 1.9 sec.
• Color temperature: 5600K
• Color temperature w/diffuser: 5250K
• Depth rating: 75m / 250ft
• Dimensions (WxHxD): 68x108x129mm / 2.7×4.3×5.2inch
• Weight: 450g / 15.8oz (w/o batteries) * Attached a fixing bolt to the Strobe.
• Underwater weight: Approx.+10g / -0.4oz(w/ batteries)
• Exposure control: DS-TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
• Pre-flash control: Equipped with pre-flash cancel mode
• DS-TTL function
• Slave function
• Auto power OFF function
• Sync cord: Fiber-Optic Cable (not included)
• Over-pressure relief valve
• LED target light

You can switch between DS-TTL (Digital Slave TTL) and a ten-level manual control function, to enable fine adjustment of the light level. You can also set up a lighting system that uses two strobes in DS-TTL mode. Power comes from four AA batteries for a powerful and long-lasting strobe. You can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes 1.9 seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting. The YS-01 is furnished with a high-luminance white LED target light (1W) indicating the optical axis of the strobe attached to its front face that is effective for night diving. You can fully exercise your creativity with the YS-01, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras. Please note that the strobe does not come with Fiber Optic Cable. Please purchase separately if required by your system setup.

Manufacturers warranty from my supplier