A diving regulator is a pressure regulator used in scuba or surface supplied diving equipment that reduces pressurized breathing gas to ambient pressure and delivers it to the diver. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a cylinder worn by the diver (as in a scuba tank) or via a hose from a compressor or a bank of cylinders on the surface (Snubling). This set-up includes a “first stage” and “second stage”.
As a nearly universal standard practice in modern recreational diving, the typical single-hose regulator has a spare demand valve fitted for emergency use by the diver’s buddy, typically referred to as the octopus (secondary regulator) because of the extra hose, or secondary demand valve.
Scuba Gauges, are also known as Submersible Pressure Gauges (SPGs) or a Console, contain a pressure gauge, depth gauge and sometimes a dive computer.
Kirk Scuba Gear carries many different SPG’s (gauges) from an assortment of manufacturers.
-
ON BACKORDER This is the Deep 6 Divesoft Freedom Nitrox Analyzer for Scuba Divers. FREE Shipping in the USA DOES NOT apply to this product
-
This item is DISCONTINUED
This is the SCUBA to Medical O2 - Adaptor & Flow Restrictor for Scuba Divers -
If you don't have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
-
Do you find it difficult to Connect/Disconnect your BCD Low Pressure Inflator Hose? Not to worry anymore with XS Scuba's Easy QD Gripper.
-
Whether missing a LP Port Plug for your regulator or if you just could use one in your save-a-dive kit?
-
Always have your octo close at hand with this great little keeper.
-
A great way to keep your gear secure on your next dive.
-
This is a great accessory to have to protect your expensive regulator mouthpiece.
-
This 1" Tank Band is perfect for 40 and 80 cu/ft tanks.
-
The Atomic hose protector will help keep your regulator set up in its best condition possible. These protectors can be added to your hoses on either side or commonly on the side attaching to your 1st stage
-
This is required if you attach a hose with a transmitter. It will stop leaks.
-
A secure way to keep your octo within sight and within quick reach
-
A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed.
-
Save money with this high pressure replacement spool instead of a new gauge. Afford to dive!
-
This is the ABSILUBE™ Pure Silicone Grease for Scuba Divers.
-
Standard octo holder. Precision fitting make this the most popular and original octo holder and mouthpiece protector made. Insert mouthpiece one side at a time to lock in for a tight seal. Patent #D321-247
-
This are the DRIS Dive Gear Color Purge Covers for Illusion Regulators for Scuba Divers.
-
Always keep your Regulator or Octo close at hand with this great clip from Innovative Scuba Concepts.
-
Ultra comfortable for long dives.
-
This is the XS Scuba Highland Garvin Hook for Jonline for Scuba Divers.
-
This is the XS Scuba Basic BC/Regulator Hanger Sturdy Construction for Scuba Divers.
-
This is the Razor Sidemount About Break Away Connector for Scuba Divers
-
This is the Highland 4.5” SS Shackle for Scuba Divers
-
This product extends air hose life, use to identify each hose. There are many colors to choose from and they fit most scuba diving air hoses. Provides color enhancement and protects hoses from abrasion
-
This is the ABSI-LUBE™ Pure Silicone Spray with Conditioners for Scuba Divers.
-
This is the Dive Rite LP to Inflator Adaptor
-
The Wrist Pouch is designed to fit comfortably around your gauge, up to 1.5 inches wide (4.25cm).
-
This is the Apeks Anti-Bacterial Mouthpiece for Scuba Divers.
-
An essential spare item, don't let a bad mouthpiece be the cause of a leaking regulator, a great item to always have on hand..
-
Make sure your reg or octo is always easily accessible
-
This awesome 700 psi Rescue Tape should be a must have for any household Keep it with your dive gear, in the car, on the boat and at home
-
Don't be left out on your next dive, this is a great kit from Trident!!!
-
This is the DRIS Dive Gear Illusion First Stage Service Kit for Illusion Regulator Package.
-
Secure attachment of a clip without causing potential damage to the hose. For use with all low pressure scuba hoses with an approximate 0.5 inch diameter.