A diving regulator is a pressure regulator used in scuba or surface supplied diving equipment that reduces pressurized breathing gas to ambient pressure and delivers it to the diver. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a cylinder worn by the diver (as in a scuba tank) or via a hose from a compressor or a bank of cylinders on the surface (Snubling). This set-up includes a “first stage” and “second stage”.
As a nearly universal standard practice in modern recreational diving, the typical single-hose regulator has a spare demand valve fitted for emergency use by the diver’s buddy, typically referred to as the octopus (secondary regulator) because of the extra hose, or secondary demand valve.
Scuba Gauges, are also known as Submersible Pressure Gauges (SPGs) or a Console, contain a pressure gauge, depth gauge and sometimes a dive computer.
Kirk Scuba Gear carries many different SPG’s (gauges) from an assortment of manufacturers.
-
ON BACKORDER This is the Deep 6 Divesoft Freedom Nitrox Analyzer for Scuba Divers. FREE Shipping in the USA DOES NOT apply to this product
-
This item is DISCONTINUED
This is the SCUBA to Medical O2 - Adaptor & Flow Restrictor for Scuba Divers -
If you don't have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
-
Do you find it difficult to Connect/Disconnect your BCD Low Pressure Inflator Hose? Not to worry anymore with XS Scuba's Easy QD Gripper.
-
Whether missing a LP Port Plug for your regulator or if you just could use one in your save-a-dive kit?
-
Always have your octo close at hand with this great little keeper.
-
A great way to keep your gear secure on your next dive.
-
This is a great accessory to have to protect your expensive regulator mouthpiece.
-
This 1" Tank Band is perfect for 40 and 80 cu/ft tanks.
-
The Atomic hose protector will help keep your regulator set up in its best condition possible. These protectors can be added to your hoses on either side or commonly on the side attaching to your 1st stage
-
This is required if you attach a hose with a transmitter. It will stop leaks.
-
A secure way to keep your octo within sight and within quick reach
-
A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed.
-
Save money with this high pressure replacement spool instead of a new gauge. Afford to dive!
-
This is the ABSILUBE™ Pure Silicone Grease for Scuba Divers.
-
Standard octo holder. Precision fitting make this the most popular and original octo holder and mouthpiece protector made. Insert mouthpiece one side at a time to lock in for a tight seal. Patent #D321-247
-
This are the DRIS Dive Gear Color Purge Covers for Illusion Regulators for Scuba Divers.
-
Always keep your Regulator or Octo close at hand with this great clip from Innovative Scuba Concepts.
-
Ultra comfortable for long dives.
-
This is the XS Scuba Highland Garvin Hook for Jonline for Scuba Divers.
-
This is the XS Scuba Basic BC/Regulator Hanger Sturdy Construction for Scuba Divers.
-
This is the Razor Sidemount About Break Away Connector for Scuba Divers
-
This is the Highland 4.5” SS Shackle for Scuba Divers
-
This product extends air hose life, use to identify each hose. There are many colors to choose from and they fit most scuba diving air hoses. Provides color enhancement and protects hoses from abrasion
-
This is the ABSI-LUBE™ Pure Silicone Spray with Conditioners for Scuba Divers.
-
This is the Dive Rite LP to Inflator Adaptor
-
The Wrist Pouch is designed to fit comfortably around your gauge, up to 1.5 inches wide (4.25cm).
-
This is the Apeks Anti-Bacterial Mouthpiece for Scuba Divers.
-
An essential spare item, don't let a bad mouthpiece be the cause of a leaking regulator, a great item to always have on hand..
-
Make sure your reg or octo is always easily accessible
-
This awesome 700 psi Rescue Tape should be a must have for any household Keep it with your dive gear, in the car, on the boat and at home
-
Don't be left out on your next dive, this is a great kit from Trident!!!
-
This is the DRIS Dive Gear Illusion First Stage Service Kit for Illusion Regulator Package.
-
Secure attachment of a clip without causing potential damage to the hose. For use with all low pressure scuba hoses with an approximate 0.5 inch diameter.
-
Are you seeking the ability to connect and disconnect high pressure components from your regulator set up? Have a high end dive computer that you don't want to leave dangling? Well, look no further!
-
This is the EZ QD Adapter
-
Super Force models are necessary for the retractor to overcome the stiffness of the high-pressure hose. This large locking version allows you to tether your console at your hip, stomach or chest area. Keeps you streamlined and your console is always right where you need it.
-
High strength stretch (to 36”) coils provide connected security to dive accessories. Each of the different ends make attachment easy. Quick release feature allows you to safely lock the item in close or release for ease of use. Ideal for cameras, lights and instruments.
-
The "Octo-Z hose to Generic Inflator Hose Adaptor" allows a standard power inflator to be used with an Octo-Z hose.
-
This is the Edge Regulator Color Kit for Women Divers.
-
Convert any standard regulator hose to a "ScubaPro Style" QD hose.
-
This is the XS Scuba Seaquest QD Hose Adapter for Scuba Divers.
-
This is the XS Scuba Oceanic Style QD Hose Adapter for Scuba Divers.
-
This is the 6" Stainless Steel Braided High Pressure Hose for Scuba Divers.
-
Streamline your dive profile with these great new Magna Clips from Trident!
-
XS Scuba Spanner Wrench Round Surface fits most manufacturer's first stages.
-
Want maximum protection for your regulator set up, maybe with long hose, dive computer, and other instruments? Don't skimp on protection.
-
Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses.
-
This is the Trident All in one Multi Tool.
-
This is the Hollis H/P High Pressure Hose for Pressure Gauges - Available in 6", 9", 24", 28"
-
This is the Aqua Lung Explorer Collection II: Diving Regulator Case Bag For Scuba Divers
-
Install hose protectors with ease with this installation tool from Innovative Scuba Concepts.
-
FREE Shipping in the USA Utilizing the same locking mechanism as the Talon knives, the Edge Knife is a smaller version with shorter 3" blade. This knife can be easily installed on a Sherwood or Genesis BCD, but also comes with a unique hose mount attachment that allows you to install the knife on your High Pressure Hose. Made of 304 Stainless Steel, you are sure to have this knife serve you well for years to come. The Edge is a great small compact knife.
-
This is the Highland 5.0” Snap Shackle for Scuba Divers
-
Enjoy your Dive or Snorkel experience to its fullest with the SeaCURE mouthpiece
-
Currently OUT OF STOCK This is the Zeagle Octo-Z hose fitting, install into any 3/8" regulator hose for dive regulators.
-
This is the Stainless Steel Star Tool::XS Scuba
-
FREE Shipping in the USA Oceanic's deluxe regulator bag is a fully padded safe place for the gear you depend on in deep dark places.
-
Anyone who has had to discharge old, leftover breathing mix knows what a problem it is to keep the hiss of the released air to a reasonable level even during relatively slow discharge.
-
This is the Scuba Max Converter for DIN regulator to Yoke...why pay more?
-
This is XS Scuba LP Angle Adapters for Scuba Divers
-
Your safety depends on a well kept regulator setup, protect your safety and your investment with this padded regulator bag from Aquacraft.
-
This is the XS Scuba Highland HP Inline Adapter for scuba divers.
-
An innovative way to keep your gear streamlined and you gauges close by.
-
This is the XS Scuba Standard Wrist/Hose Mount Compass Complete for Scuba Divers.
-
This is the XS Scuba Voyager 5 Scuba Diving Regulator Bag for Scuba Divers
-
This is the XS Scuba Highland Inline Shut Off for 1st and 2nd Stage for Scuba Divers.
-
This is the Trident 7ft Scuba Diving Regulator LP Hose with 3/8 Male Connector
-
This is the XS Scuba Highland Deluxe Inline Shut Off for Second Stage