A diving regulator is a pressure regulator used in scuba or surface supplied diving equipment that reduces pressurized breathing gas to ambient pressure and delivers it to the diver. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a cylinder worn by the diver (as in a scuba tank) or via a hose from a compressor or a bank of cylinders on the surface (Snubling). This set-up includes a “first stage” and “second stage”.
As a nearly universal standard practice in modern recreational diving, the typical single-hose regulator has a spare demand valve fitted for emergency use by the diver’s buddy, typically referred to as the octopus (secondary regulator) because of the extra hose, or secondary demand valve.
Scuba Gauges, are also known as Submersible Pressure Gauges (SPGs) or a Console, contain a pressure gauge, depth gauge and sometimes a dive computer.
Kirk Scuba Gear carries many different SPG’s (gauges) from an assortment of manufacturers.
-
The Atomic hose protector will help keep your regulator set up in its best condition possible. These protectors can be added to your hoses on either side or commonly on the side attaching to your 1st stage
-
This is the Highland 5.0” Snap Shackle for Scuba Divers
-
This is the Highland 4.5” SS Shackle for Scuba Divers
-
This is the XS Scuba Voyager 5 Scuba Diving Regulator Bag for Scuba Divers
-
This is the Aqua Lung Explorer Collection II: Diving Regulator Case Bag For Scuba Divers
-
This is XS Scuba LP Angle Adapters for Scuba Divers
-
This is the Razor Sidemount About Break Away Connector for Scuba Divers
-
This is the Pool Cleaning Bundle/Swimming
-
This item is DISCONTINUED
This is the SCUBA to Medical O2 - Adaptor & Flow Restrictor for Scuba Divers -
FREE Shipping in the USA This is the PALM-CO Carbon Monoxide Analyzer for Scuba Divers
-
This is the XS Scuba Leeward 6 Regulator Bag for Scuba Divers
-
This is the Dive Rite LP to Inflator Adaptor
-
This is the Edge Regulator Color Kit for Women Divers.
-
This is the Trident All in one Multi Tool.
-
This is the XS Scuba Basic BC/Regulator Hanger Sturdy Construction for Scuba Divers.
-
ON BACKORDER This is the Deep 6 Divesoft Freedom Nitrox Analyzer for Scuba Divers. FREE Shipping in the USA DOES NOT apply to this product
-
This is the Deep 6 Oxygen sensor Divesoft R22S.:::::Currently Out of Stock FREE Shipping in the USA DOES NOT apply to this product
-
This is the Apeks Anti-Bacterial Mouthpiece for Scuba Divers.
-
This is the ABSILUBE™ Pure Silicone Grease for Scuba Divers.
-
This is the XS Scuba Highland HP Inline Adapter for scuba divers.
-
This is the XS Scuba Highland Garvin Hook for Jonline for Scuba Divers.
-
This is the XS Scuba Standard Wrist/Hose Mount Compass Complete for Scuba Divers.
-
This is the XS Scuba SuperTilt Compass Module ONLY for Scuba Divers.
-
FREE Shipping in the USA This is the XS Scuba Wrist Mounted Depth Gauge for Scuba Divers
-
This is the XS Scuba Highland Deluxe Inline Shut Off for Second Stage
-
This is the XS Scuba Highland Inline Shut Off for 1st and 2nd Stage for Scuba Divers.
-
This is the Zeagle Tank Fill Adaptor 330-FA10-AA Connection for Standard Scuba Valve Filling Whip.
-
This is the Zeagle Compact Pony SPG Pressure Gauge for Scuba Diving Bottle Spare Cylinder.
-
Currently OUT OF STOCK This is the Zeagle Octo-Z hose fitting, install into any 3/8" regulator hose for dive regulators.
-
This is the 6" Stainless Steel Braided High Pressure Hose for Scuba Divers.
-
This is the DRIS Dive Gear Illusion First Stage Service Kit for Illusion Regulator Package.
-
This are the DRIS Dive Gear Color Purge Covers for Illusion Regulators for Scuba Divers.
-
FREE Shipping in the USA This is the Aqua Lung The Elemental Package for Beginner Scuba Divers.
-
This is the ABSI-LUBE™ Pure Silicone Spray with Conditioners for Scuba Divers.
-
This is the XS Scuba Oceanic Style QD Hose Adapter for Scuba Divers.
-
This is the XS Scuba Seaquest QD Hose Adapter for Scuba Divers.
-
Convert any standard regulator hose to a "ScubaPro Style" QD hose.
-
This 1" Tank Band is perfect for 40 and 80 cu/ft tanks.
-
A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed.
-
Anyone who has had to discharge old, leftover breathing mix knows what a problem it is to keep the hiss of the released air to a reasonable level even during relatively slow discharge.
-
Protecting your computer or instrument console is of high priority. XS Scuba's Quick Disconnect (QD) Adapter Bayonet Mount allows you with a simple push and turn by hand to detach your dive instruments from the high-pressure hose.
-
Do you find it difficult to Connect/Disconnect your BCD Low Pressure Inflator Hose? Not to worry anymore with XS Scuba's Easy QD Gripper.
-
This is the XS Scuba Miflex DS "Dual Swivel" Regulator Hoses::Scuba Divers
-
XS Scuba Spanner Wrench Round Surface fits most manufacturer's first stages.
-
This is the Stainless Steel Star Tool::XS Scuba
-
The Wrist Pouch is designed to fit comfortably around your gauge, up to 1.5 inches wide (4.25cm).
-
Secure attachment of a clip without causing potential damage to the hose. For use with all low pressure scuba hoses with an approximate 0.5 inch diameter.
-
This is the EZ QD Adapter
-
This is required if you attach a hose with a transmitter. It will stop leaks.
-
Are you seeking the ability to connect and disconnect high pressure components from your regulator set up? Have a high end dive computer that you don't want to leave dangling? Well, look no further!
-
Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses.
-
This is a full-size three gauge console that is equipped with air-filled heavy-duty steel case depth and pressure gauges.
-
This is the ScubaMax two-gauge mini console. This product is produced in Italy.
-
Built from precision, originality and performance, ScubaMax equipment works to combine durability and affordability. Our products embody the contemporary design and the professional composition needed to help divers perform better, feel better and explore better. It is not only about the style and comfort, it is the experience. Our one simple goal is helping you achieve the best underwater exhibition we can provide.
-
This is the Trident 7ft Scuba Diving Regulator LP Hose with 3/8 Male Connector
-
FREE Shipping in the USA::Black ONLY in Stock This is the Trident 50 ft 3/8" Scuba Diving Regulator Hose
-
This is the Hollis H/P High Pressure Hose for Pressure Gauges - Available in 6", 9", 24", 28"
-
Super Force models are necessary for the retractor to overcome the stiffness of the high-pressure hose. This large locking version allows you to tether your console at your hip, stomach or chest area. Keeps you streamlined and your console is always right where you need it.
-
This is the Scuba Max Converter for DIN regulator to Yoke...why pay more?
-
If you don't have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
-
An essential spare item, don't let a bad mouthpiece be the cause of a leaking regulator, a great item to always have on hand..
-
A secure way to keep your octo within sight and within quick reach
-
The "Octo-Z hose to Generic Inflator Hose Adaptor" allows a standard power inflator to be used with an Octo-Z hose.
-
FREE Shipping in the USA Oceanic's deluxe regulator bag is a fully padded safe place for the gear you depend on in deep dark places.
-
Don't be left out on your next dive, this is a great kit from Trident!!!
-
This ChristoLube "super lubricant" has been adopted industry wide for virtually all regulator maintenance.
-
Ultra comfortable for long dives.
-
Standard octo holder. Precision fitting make this the most popular and original octo holder and mouthpiece protector made. Insert mouthpiece one side at a time to lock in for a tight seal. Patent #D321-247
-
This is the Trident Tank to Tire Inflator Yoke First Stage with Hose and Tire Connection